Kätevä vetolaatikosto, joka sisältää kaikki tarvittavat työkalut pyörän korjaukseen ja huoltoon. Suunniteltu erityisesti pyöräliikkeille, korjaamoille ja ammattilaistiimeille. Tuote sisältää vetolaatikoston sekä kaikki listattuna olevat työkalut. Laatikoston kulkee kätevätsi pyörillä, joten helpottaa ottaa mukaan myös erilaisiin tapahtumiin tarvittaessa. Saatavilla myös 3 lisäosaa: Ruuvipenkki, lisätyötaso sekä korjausteline. Lisäosat ostettavissa erikseen.   1 Taso: •A1:  1-Freewheel remover with guide pin, for Shimano®, SunRace®, SRAM®, Chris King®, SunTour® and similar cassette lockrings.  1-Freewheel turner, for 5 to 10 speed cassettes.  1-Lockring wrench, for most lock-rings of bottom bracket.  1-Bottom bracket wrench, for Shimano® Hollowtech II, Truvativ® GXP, FSA® MegaExo, Campagnolo® Ultra-TorqueTM, TOKEN®, and similar external B.B. cups with 16 notches.  1-Crank installation tool to remove and install crank arm adjustment cap.  1-Bottom bracket tool & freewheel remover, for Campagnolo® B.B. cups and Campagnolo® cassette lockrings ( RecordTM, ChorusTM and AthenaTM ).  1-Cartidge B.B. tool with guide pin, for Shimano®, ISIS Drive® splined 20-tooth bottom bracket cups, FSA®, Race Face®, Truvativ® and TOKEN®.  •A2:  8-T/L handle hex wrench, 2 / 2.5 / 3 / 4 / 5 / 6 / 8 / 10 mm.   2 Taso： •B1:  1-12" adjustable wrench. 1-Freewheel remover with guide pin, for Shimano®, SunRace®, SRAM®, Chris King®, SunTour®, and other cassette lockrings.  1-Freewheel remover, for Shimano® MF freewheel.  1-Freewheel remover, for 4-notch BMX & single-speed freewheels.  1-Cartridge B.B. tool, for Shimano®, ISIS Drive® splined 20-tooth bottom bracket cups, FSA®, Race Face®, Truvativ® and TOKEN®.  1-Cartridge B.B. tool, for Shimano®, Truvativ®, SRAM® and all ISIS Drive® 8-notch B.B. cups.  1-B.B. tool, for Shimano® Hollowtech II, Truvativ® & FSA® MegaExo & Campagnolo® Ultra-Torque, TOKEN® and many other external bearing crankset bottom brackets.  1-1/2" Dr. bit socket 10 mm hex wrench for Campagnolo®.  8-Combination wrench, size: 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 mm.  •B2:  4-Headset wrench, size: 30 / 32 mm, 36 / 40 mm, 15 / 32 mm, 32 / 36 mm.  1-Double-ended bottom bracket lockring hook spanner.  2-Double-ended wrench, size: 8 / 10 mm, 9 / 11 mm.   3 Taso： •C1:  1-Professional pedal wrench 15 mm.  1-Multi-function pedal wrench 15 mm with 14 / 15 mm box wrench.  1-T-shaped wrench, 3-ended with T30 / hex 5 mm / T30.  1-T-shaped chainring nut wrench, 3-ended with T40 / hex 6 mm / chainring nut wrench.  1-2 in 1 cotterless crank tool, for standard square, splined Shimano® octalink and ISIS Drive®.  3-Y wrench, size: hex 2 / 2.5 / 3 mm, hex 4 / 5 / 6 mm, T25 / T30 / T40.  8-Hex key wrench w/ ball end, size: 2 / 2.5 / 3 / 4 / 5 / 6 / 8 / 10 mm.  •C2:  7-Professional hub cone wrench, size: 13 / 14 / 15 / 16 / 17 / 18 / 19 mm.  1-B.B. wrench for installation and removal of Campagnolo® ( VeloceTM, MirageTM, CentaurTM, DaytonaTM and AvantiTM ) cartridge bottom brackets.  1-Rotor truing fork.   4 Taso： •D1:  4-Frame tap, size: 3 mm x 0.5; 5 mm x 0.8; 6 mm x 1.0; 10 mm x 1.0  4-Pedal tap, size: 1/2" x 20 ( L & R ), 9/16" x 20 ( L & R ).  1-Inner cable puller. 1-Professional cable & housing cutter.  1-Chain rivet extractor for 1/8" to 3/16" BMX and single speed chain.  1-Chain rivet extractor for 10 & 11 speed chain.  1-Chain rivet extractor for 8, 9 & 10 speed chains, with 1 spare pin and 1 chain hook.  1-2 in 1 chain checker and chain hook.  1-Replacement pins set for Super B chain rivet extractors (10 pcs / kit).  •D2:  4-Spoke wrench, size: 3.2 / 3.3 / 3.5 mm and for Mavic® 6 splines of integrated nipples with 5.65 mm outside diameter and 7 mm thread nipple.  2-Professional tire lever, made of high grade steel.  1-Aero spoke key, size: 0.9 / 1.1 / 1.3 / 1.9 mm.  1-Spoke wrench, size: for Shimano® wheel system 4.3 & 4.4 mm nipples.  1-Spoke wrench, size: for Mavic® 9 mm threaded eyelets and 7 mm integrated nipples.  4-Screwdriver, size: Phillips 0 / 2 and slotted 3 / 6.  4-Nipple tool, size: hex 4.8 mm, hex 5.5 mm, square 3.2 mm and slotted end for conventional slit nipple.  3-Tire lever.   5 Taso： •E1:  1-Star nut setter for 1" & 1-1/8" threadless headsets.  1-Dead blow hammer.  1-Measure tap, 3 m / 10 ft.  1-Spoke, bearing and crank cotter gauge.  1-Oversized tube cutting guide.  1-Crown race remover for 1", 1-1/8", 1-1/4", 1-1/2" forks.  1-Brake piston press for speeding up pad replacement.  •E2:  1-Bike folding brush.  3-Bike brush.  1-Chain cleaner.   6 Taso： •F:  1-Wheel alignment gauge for 16" to 26" wheels.  1-Hacksaw, with a steel blade 12"( 300 mm ).  1-Hacksaw blade for cutting carbon components.  1-1/4" Dr. dial-adjust torque wrench 3~15 Nm, with bit sockets: hex 2 / 2.5 / 3 / 4 / 5 / 6 / 8 / 10 mm, T25.  1-6" Diagonal cutting nippers.  1-7" Combination pliers.  1-8" Long nose pliers.  1-10" Waterpump box joint.   7 Taso： •G:  1-3/8" Dr. dial-adjust torque wrench 12~60 Nm with bit sockets: hex 4 / 5 / 6 / 8 / 10 mm, T25 / T30 / T40, adaptor 3/8" Dr. x 1/2" Dr.  1-Bearing cup press for most standard 1", 1-1/8", 1-1/4" and 1-1/2" headset cups.  1-Head cup remover for 1", 1-1/8" and 1-1/4" press fit external cups.  1-Heavy duty shop apron.

Työtaso lisäsosana TBA-9000 työkalulaatikoston lisäksi.