View in English

Evästevalinnat

Evästeet ovat selaimeesi tallennettuja pieniä tiedostoja. Sivuillamme käytetään evästeitä ja muita vastaavia teknologioita sivuston toiminnallisuuksiin, kokemuksesi henkilökohtaistamiseen ja verkkosivun käytön analysointiin.

  • Toiminnallisuus

    Tämä ryhmä sisältää sivuston tominnan kannalta välttämättömiä evästeitä, kuten kirjautumisen, ostoskorin ja kampanjat.

    Huntterin tietosuojaseloste

  • Kohdentaminen

    Sivustollamme käytetään markknointiin liittyviä evästeitä mahdollistamaan sivustokäyttäytymisesi seurannan jonka avulla voimme tarjota sinulle parempia mainoksia.

    Googlen tietosuojaseloste

    Facebookin tietosuojaseloste

Muuta valintoja

Orbea varaosat

Orbea varaosat

Tuotteita (307)

ACROS HEADSET 1 1/8-1 1 1/5 STEERING LIMITER 164º X372

1 1/8-1 1/5 ACROS HEADSET WITH 164º STEERING LIMITER. STARNUT NOT INCLUDED. Sama kuin X372

ANGLE COVER STEM ICR

ANGLE COVER STEM ICR Tsekkaa yhteensopivuus linkistä:https://www.orbea.com/fi-en/gear/spare-parts/ Lower angle stem cover for internal cabling for assemblies with the ICR01 road stem.   Compatible models (Model Year): -Orca OMR 2021 (models with ICR01 stem). -Orca OMX 2020 -Gain Carbon 2021

AXLE FRAME-LINK KIT WILD FS 20

Hardware kit for the linkage-frame pivot point on Wild FS 2020 frames. Bearings not included. Tarkasta yhteensopivuus Orbean sivuilta: https://www.orbea.com/fi-en/gear/spare-parts/X374TTCC Sekä muut komponentit: https://www.orbea.com/fi-en/gear/spare-parts/

BATTERY MOUNT S/POST ORCA AERO OMX

BATTERY MOUNT S/POST ORCA AERO OMX Shimano Di2 battery bracket for Orca Aero OMX seatposts.

BEARING KIT HEADSET ICR ROAD

BEARING KIT HEADSET ICR ROAD Headset bearing kit for internal cabling road headsets ICR. Top bearing: Integrated 1-1/2" Bottom bearing: Integrated 1-1/2"

BEARING KIT LINKAGE F.SUSP OCCAM/WILD FS/RISE

BEARING KIT REAR AXLE FULL SUSP 20 Rear axle pivot bearings kit on Concentric Boost frames full suspension frames. Includes: 2x 6803 bearings

HARDWARE KIT LINKAGE RISE 21

BEARING KIT LINKAGE F.SUSP 20 Linkage and frame pivot point bearing kit for Concentric Boost 2 frames.   Compatible models (Model Year). -Occam Carbon 2020 -Occam Hydro 2020 -Rise Carbon 2021

BEARING KIT MAIN PIVOT F.SUSP

BEARING KIT MAIN PIVOT F.SUSP 20 Main swingarm pivot point bearing kit for carbon Concentric Boost 2 frames. Bearings not included.   1x 6803 1x 6802   Compatible models (Model Year). -Occam Carbon 2020 -Rise Carbon 2021

BOLT KIT HANDLEBAR-STEM ORDU OMX

Ordu OMX handlebar and stem bolt kit. Includes: -Headset preload bolt -Stem fixing bolts to the frame and forks. -Bridge fixing bolt to front post -Stem cover bolts -Aero handlebar fixing bolts to the forks.

BOSCH ADAPTER KIT DUALBAT 515/430MM

ADAPTER KIT FOR DUALBATTERY (BCH231) 515 / 430 mm Including Charging socket blanking plug kit and pin cover When inserting two batteries Please order cable separately! Not upgradeable! When using two frame batteries or one frame and one rack battery, in conjunction with corresponding battery cables: 1270015067 - Cable Frame Battery 310 mm 1270015079 - Cable Rack Battery 820 mm Warning: Cannot be retrofitted. Cable is only intended as a replacement part.    Compatible with: BDU2XX BDU3XX BDU4XX

BOSCH BATTERY HOLDER KIT

HOLDER KIT FOR FRAME BATTERY, BLACK BBS2XX Including holders and 2 x thread forming screws 3.5 x 12 Compatible with: BDU2XX BDU3XX BDU4XX

BOSCH CABLE POWERPACK FRAME 310MM

CABLE FOR FRAME BATTERY 310 MM (BCH210) Compatible with: BDU2XX BDU3XX BDU4XX

BOSCH CHARGING PORT PROTECTOR

BOSCH CHARGING PORT PROTECTOR RUBBER CHARGING PORT PROTECTOR FOR BOSCH SYSTEMS ON WILD FS 2020 AND WILT HT 2020 FRAMES FOR MODELS: -WILD FS CARBON 2020 -WILD FS HYDRO 2020 -WILD HT 2020

BOSCH HOLDER MOUNTING KIT

HOLDER FOR FRAME BATTERY ADAPTER KIT BBS2XX Holding frame and set of screws for frame battery Compatible with: BDU2XX BDU3XX BDU4XX

BOSCH PLASTIC HOUSING KIT FOR LOCK

PLASTIC TRIM KIT FOR FRAME BATTERY LOCK Including top and bottom cover, 1 x thread forming screw 3.5 x 12 and 2 x socket screws M5x12 Compatible with: BDU2XX BDU3XX BDU4XX

BOSCH POWERPACK 500WH AKKU

BOSCH POWERPACK 500WH AKKU Retrofit product for the end customer 25% more range than the PowerPack 400 but only 4% heavier 40-cell packs with the highest energy density (190 Wh / kg) and the lowest weight (2.7 kg) and volume Integrated Battery Management System ensures high mileage and long service life No memory effect and no self-discharge Safety data sheet (e.g. air transport) in the Bosch dealer portal Compatible with:  BDU2XX BDU3XX BDU4XX

BRAKE CLIP PLASTIC STOP X052

BRAKE CLIP PLASTIC STOP uusi koodi - X052 Brake clip plastic stop compatible with bicycles: TERRA, AVANT-D, ORCA-D from years 2017/2018 https://www.orbea.com/fi-en/gear/spare-parts/X502TTCC

CHAINGUIDE KIT RISE 21

Orbea Rise ketjuohjuri

CHARGE PORT COVER RISE 21

CHARGE PORT COVER RISE CARBON 21 Orbea RS system seat tube charging port cover for Rise Carbon frames. RISE CARBON 2021-2022

CHARGE PORT+HARNESS CABLE RISE21

CHARGE PORT+HARNESS CABLE RISE21 Harness cable for Orbea RS systems which includes in one unit the charging port and the motor, internal battery and power button connection cables. If the charging port is supplied with a rubber cover, it is necessary to cut it (the rubber cover) for a correct installation of the charging port onto the frame. Compatible models (Model Year). -Rise Carbon 2021